Fire Detection and Suppression



SD-9-10

Standalone Smoke Detector – SD9-10

This product is a battery operated photoelectric smoke detector. Advanced photoelectric sensor technology is used inside detector. This product is used for detecting smoke and sending signal to control panel.


Conventional Smoke Detector – SD12

This product is used for Smoke detection and sending signal to control panel. Photoelectric technology is used in this sensor. The basic principle of detecting carbon particle present in smoke by using Infrared diodes.

SD12_1

SD-9-10

Standalone Smoke Detector – SD9-1

This product is a battery operated photoelectric smoke detector. Advanced photoelectric sensor technology is used inside detector. This product is used for detecting smoke and sending signal to control panel. Photoelectric technology is used in this sensor.


Conventional Smoke + Heat Detector – SHD12

This product is consist of Photoelectric smoke and heat detector. It is detects the smoke by a couple of infrared diodes. The principle of detecting is granule in the smoke can reflect infrared light. Infrared diodes are placed in the special chamber

SHD12

Fas-02_2

FIRE Detection System – FAS-02

Fire Detection System is basically conventional 2-zone system to protect residential as well as commercial premises. It has a potential free relay output siren for audio FIRE alarm indication. Other LED indications for sensors are open, short, bypass and Fire Detection. Zone bypass facility is available with separate key for each zone. All the keys are disable by using a key lock arrangement. When the Fire is detected by any one of the Fire detector within a zone, alarm will be activated.


FIRE Detection System – FAS-04

Fire Detection System is basically conventional 4-zone system to protect residential as well as commercial premises. It has a potential free relay output siren for audio FIRE alarm indication. Other LED indications for sensors are open, short, bypass and Fire Detection. Zone bypass facility is available with separate key for each zone. All the keys are disable by using a key lock arrangement. When Fire is detected by any one of the Fire detector within a zone, alarm will be activated.

Fas-04_2

FSS-2Dapanel_1

Two Zone Fire Suppression System – FSS-2D

Fire suppression system (FSS-2D) is basically a conventional 2-zone system to protect residential as well as commercial premises and suppress fire immediately at the time of crisis. It has a potential free relay output siren for audio fire alarm indication.


Two Zone Fire Suppression System – FSS-021D

“Vighnaharta A3S” brings to you Fire Suppression Panels with unique features. They are NFPA & EN54-2 compliant and posses all the features required by international users. Panels are EMI/EMC tested and are protected against power line surges. Fault tolerant, intelligent, triple logic electronic hardware circuit coupled with intelligent software removes probability of accidental release.

sideab_1_1

sideab_1_2

Four Zone Fire Suppression System – FSS-042D

“Vighnaharta A3S” brings to you Fire Suppression Panels with unique features. They are NFPA & EN54-2 compliant and posses all the features required by international users. Panels are EMI/EMC tested and are protected against power line surges. Fault tolerant, intelli-gent, triple logic electronic hardware circuit coupled with intelligent software removes probability of accidental release.


Response Indicator – RI

Response Indicators are used as an auxiliary indication for detectors that are located in closed space (i.e. not visible for Example above false ceiling, closed rooms etc.) Detectors are equipped with a terminal to allow connection to the response indicator. Response indicator contain LED which lights up as soon as the connected detector detects fire.

response_indicator

SD12Ra

Conventional Smoke Detector – SD12R

This product is used for detect the smoke and sending signal to control panel. Photoelectric technology is used in this sensor. The basic principle of detecting carbon particle present in smoke by using Infrared diodes.


Glass break MCP

Manual call points are designed for sending an alarm manually after verification of fire or emergency con-dition exists, by operating the push button the alarm signal can be raised.

MCP
Share This
About

Comments are closed here.